RUSTINS Metal Laquer, Clear, 125 ml (Pack of 1)

Product Information

It is perfect for preventing tarnishing on metals which are particularly susceptible to oxidisation during wear such as brass and copper as well as for protecting patinas which you have purposefully applied, such as liver of sulphur. The lacquer is best applied in dry warm weather as dampness can sometimes result in ‘blushing’ of the surface which results in a milky finish. If however, brush marks are left on the article when dry place the article on a hot radiator or in the oven at a low temperature, the brush marks will then disappear.

a b Franco Brunello (1973), The art of dyeing in the history of mankind, AATCC, 1973, ... The word lacquer derives, in fact, from the Sanskrit 'Laksha' and has the same meaning as the Hindi word 'Lakh' which signifies one-hundred thousand ... enormous number of those parasitical insects which infest the plants Acacia catecu, Ficus and Butea frondosa ... great quantity of reddish colored resinous substance ... used in ancient times in India and other parts of Asia ... Do not apply in damp weather conditions. Rustins Metal Lacquer is not suitable for use on some metals such as mild & stainless steel. Many metals suffer from surface tarnishing and even corrosion, if left open to the atmosphere / air. Surfaces can be protected through the application of different finishes, such as paint or powder coating. However, sometimes the surface of metals can be attractive without the need for a coloured coating. This is when lacquer is most useful. Lacquer is usually applied as a clear coating, leaving the surface texture on view. Lacquer forms a protective clear layer on metals and is particularly useful on brass, aluminum, silver and copper, which are often in the form of decorative items. When lacquered, polishing and cleaning will no longer be required. If possible objects such as letterboxes should be removed from the door so that at least one coat of lacquer can be applied to the edges of the reverse side. Lacquer-yielding trees in Thailand, Vietnam, Burma and Taiwan, called Thitsi, are slightly different; they do not contain urushiol, but similar substances called laccol or thitsiol. The result is similar but softer than the Chinese or Japanese lacquer. Burmese lacquer sets slower, and is painted by craftsmen's hands without using brushes.a b c d Webb, Marianne (2000). Lacquer: Technology and conservation. Oxford: Butterworth-Heinemann. p.3. ISBN 978-0-7506-4412-9. Lacquer dish with Chinese character for longevity, mid 16th century Maki-e sake bottle with Tokugawa clan's mon (emblem), Japan, Edo period Lacquer plate, Nam Định province, Vietnam, Nguyễn dynasty

Ulrich Meier-Westhues (November 2007), Polyurethanes: coatings, adhesives and sealants, Vincentz Network GmbH & Co KG, 2007, ISBN 978-3-87870-334-1, ... Shellac, a natural resin secreted by the scaly lac insect, has been used in India for centuries as a decorative coating for surfaces. The word lacquer in English is derived from the Sanskrit word laksha. which means one hundred thousand ... Lacquer is regularly used on brass ornaments and on the surface of finely machined steel. This ensures that the surface remains as clean and polished / machined, as the day the initial finish was produced.Before use, remove any old lacquer or finish if present, with Rustins Strypit Paint & Varnish Stripper. Painting with metal lacquer is not difficult. Start by preparing the metal surface. For metal, it is crucial whether you want to paint untreated metal or metal that has already been painted. In any case, the surface must be clean and free of grease to ensure good adhesion. Roughen the surface with sandpaper. For large metal surfaces, you can use a sander. Tape off all surfaces that are not to be painted and also protect the surrounding area with a suitable cover. Please note the following postcodes are classed as Non-Mainland UK or Remote / Rural delivery: AB, IV, KW, PA, PH, HS, KA, ZE, PO30-PO41, IM, JE, GY, BT, TR21-TR25. In modern techniques, lacquer means a range of clear or pigmented coatings that dry by solvent evaporation to produce a hard, durable finish. The finish can be of any sheen level from ultra matte to high gloss, and it can be further polished as required. Lacquer finishes are usually harder and more brittle than oil-based or latex paints, and are typically used on hard and smooth surfaces. [ citation needed]

Metal lacquers provide a protective finish against dirt, debris, and other contaminants. The metals that respond best to metal lacquer finishes include: Standeven, Harriet A. L. (2011). House Paints, 1900-1960: History and Use. Getty Publications. ISBN 9781606060674. Water-based lacquer used for wood finishing is also not rated for exterior wear, unless otherwise specified. Main article: Urushiol A Chinese six-pointed tray, red lacquer over wood, from the Song dynasty (960–1279), 12th–13th century, Metropolitan Museum of Art.

\n\t\t\tHalfords Universal Clear Lacquer 500ml

Surface Preparation - Surface must be clean and free from all traces of wax, grease and metal polish. Salespeople that act as an extension of your purchasing department (we will get any metal products you need) Materials to be lacquered, must have a clean surface, with all dirt / grease removed. Lacquer should be applied in a dust free environment, with workers wearing appropriate protective clothing and breathing mask. Usually, the spray can version of lacquer is the easiest to apply, as the product can be sprayed lightly, allowing plenty of time between coats. Lightly tarnished surfaces should be cleaned with a good quality metal polish, which must then be removed with warm soapy water.

The lacquer can be applied by spray and due to its low viscosity it is not normally necessary to thin.

If the surface is not smooth, a nail brush should be used to ensure there is no polish left in the crevices. Green, C. L. (1995). "5: Insect Dyes". Non-Wood Forest Products 4: Natural colourants and dyestuffs. Rome: Food and Agriculture Organization of the United Nations. Archived from the original on 12 August 2011 . Retrieved 3 July 2014. The first practical nitrocellulose enamel Glossy White S.2567, still for interior use, was introduced in 1919 in the UK by Nobel Explosives. [26] In 1923, General Motors' Oakland brand automobile was the first to introduce one of the new fast-drying nitrocellulose lacquers, a bright blue, produced by DuPont under their Duco tradename. [24] :295–301 In 1924 the other GM makes followed suit, and by 1925 nitrocellulose lacquers were thoroughly disrupting the traditional paint business for automobiles, appliances, furniture, musical instruments, caskets, and other products. [24] :295–301 Henry Ford and, in the UK, Herbert Austin were introducing nitrocellulose lacquers at the same time, and soon the market flourished.