SplashNcolor Fingerboard Mold DIY Mini Press Kit and Shaper Assembly Tool | Grip Tuned Design for Deep Nose Tail for Fingerboard Parts for Skill Level Riders

Product Information

follow the same process as this guy, except use cardboard as your outer casing to wrap around the board instead of a wood frame. For example, Etsy prohibits members from using their accounts while in certain geographic locations. We make our molds using high quality PLA or PETG with a higher density/infill to give it more durability (these will last longer after repeat uses).

unless you really know what you're doing and you're good at math and measurements i wouldn't recommend making a bondo mold this way. Here are the specifications: Length: 96mm Width: 33mm Concave Height: 2mm Concave Length: 37mm Nose Length: 20. S. of the following products of Russian origin: fish, seafood, non-industrial diamonds, gold, and any other product as may be determined from time to time by the U. Edit) It turned out really nicely, the boards are a perfect shape, somewhat similar to my Subliminal Fingerboards, though I like the shape even better. I remixed skatemaster231's I printed this mold when i use this(i used ABS) broken top mold support fixture so i fix this with shaper when you use it please read this page CC ----------original------------- This is a generic fingerboard mold with.A super fun little project, this fully 3d-printable system can be used to press and drill deck blanks for fingerboards. If we have reason to believe you are operating your account from a sanctioned location, such as any of the places listed above, or are otherwise in violation of any economic sanction or trade restriction, we may suspend or terminate your use of our Services.

Setup : D͐̏̋̐ͣ̐͊́͂̈́ͨ̏̋ͥ̆͑ͧ͘͜҉̺̙̹̞̗͚̤̻̫̼̳͖͔̩̤̘͇o̚­­̱̰̳̟̟̞̜̖̬̌ͦ͌͂ͦ̎̅ͫ̑͂ͦͩ́̚͢ ̴̮͍̲̖̖̤̯͎͎͋̈́ͫ̂̊̇ͤ̆̓̌ͫ̐ͣͣ̆ͬ͌̚͡y̆ͪͫ̉ͭ̅ͫ͊ͩ́­­̨̛̬̠̰̙̫̮̪̟͈̯̘͎̗́̀o̶̶̘̝͇̜̝͓̞͉̰̫͚ͣ̽̄̀ͅu͗̊­̏­̷̡͙̜̳̠͈͕̹͑̿͌̓̇̽͂̄͋ͯ͂̍ͣ̂̓̀͘̕ ̣̳̭̝̻̣̤̫̣̠̦̙̦̲ͣ͂̃ͦ̑ͦ̃͂ͣ̓̇͒̈͘͠t͒̎ͯ͐͂͛̏̈ͦ̐­­̴̼̖̫̞͔̺ͧͭ̅͊̾ͣ͒́̚̚͘̕h̬̖̙͙̰͖̺͛̾̐̃ͦͪ̏ͧ͌̓͘̕­͙­̟į̶̻͖̠̟͔̟̦̝̜̞̄̇̏̂ͨ̋͂̕͟͝nͨ͌͊̓̆̾͛̏ͬ̑̎̾̚­ͭͮ­̵̌ͫͩ҉̶̵̰̫̩̲͕̱̗͚͇̰ͅk͙̳̳͓̟̝̠̯̝̔ͧͤͩ̾̀͢͢͠­͙̻͙­̻̱̼͖ͅ ͥͫ͒ͧ̏ͯͮ̓ͬͯ̾̽̈̀ͥ́̀͘͠҉͈̩͍͔̲͖͔ț̶̛̛̅͌̋ͬ͌̄͜͞­­͎̜̜̰͙̰̝̝̦̪̜h̸̥͎̰̤̼̱̝̜̭̹͆̾̈̓̌ͮ̎̅̄̅͋̋̔̿̚̕­͖­̱̗̗̪̫̻i̡̩̬̰̹̩͓̩̣̱̗̹͑ͧ̾̿̂̚͟͡ͅs̐ͤͭ̐ͫ͋ͮ́҉­̢͏­̳̦̠͕̠͈̣͕̫͔̫͖͖̹̗̟͢ ̴̠͓̺̩̩̙̬̬͈̼̭̰͖̱̺̣̗̫̉͂ͪ̔̍̀ͫ̀̎̏̔ͯ̌̒̒ͩͧ́i͛͋­­̸̄̂͊͋͗͑͏͙̙͈̦͎̥̰̕s͂̍̑ͫ́̇͌̑̿̒ͦ̓̊͛̚̚̚҉́̕͞͡­̞­̟̣̻̲̜̫̺͉̠̬̥̙̜̪̭ ̧̖͔͕̹ͧ̐ͦ̎̊ͧ̽ͨͦ̒͐̀͞͡ͅaͦͦ̅̐͐ͥ͂̓̋͒̔̄ͣͤ͂͂͆͊ͬ­­̨̛͈̞̪̖͓̣̫̰̠̤̖̠͉̪͔͟ ̡̛̱̦̗̫̯̻͓̭ͦ͒̐̒̆̇̉̀p̡ͤͮ͛ͫ͋̽̄̎̑͑̈̉̒͛̎͋̿ͮ̓͠­­͏͚̮̖͖̫̦͙͎̭̜͇̺̻̩̹̕r̴̵̡̟͖̫̝̘̜̝͇̙̦̍̆̃́ͦ̚͘͢­̝­̪̞o̷̧͔̪͙͓͔͓̞̘̺̟͇̳͎̦̩̣̻̩ͮ̅͊̉̽̄̍̋͐ͥ̓́͐̚͢­͓b­̡̥̞̳̙̠̞̘͉̼̤̘̝ͨͣ͌ͥͤ̍̓ͩ́̈́ͨ̅̓ͧ̅͢lͭ̿͂͛̄͐̈­͗̑̓­ͭ͆̉͋ͩ̿̋̇͡͡͞҉͔̼̻̣̝̜̭̖͕̙͈͓̖ͅeͣ̂ͭͤ͑̏ͬͨ̓­҉̨̖͞­̼̹͉̹͈ͅm̛͛ͦ̾̉̋́̊͐͐̂̐̎̄ͯͤ̚҉̡̻̳̤̥̪͎̹͜ͅ­͔͉̝͍̫­͖̺͓̬͙?The materials you will need to make a fingerboard are a fingerboard mold kit, layers of hardwood veneers for the deck, adhesive glue, and a drill.

The fingerboard mold is common with businesses producing fingerboards or hobbyists, and retailers who make fingerboards to sell.A place to get together, post clips, ask for help, and just about anything you can think of pertaining to the hobby. The fingerboards come in various types, including 3D fingerboard mold, aluminum fingerboard mold, and wooden fingerboard mold. seems quite sturdy too, a very good print but will have to sand out a few layer lines to minimalize the marks they would leave in the board but not a problem for me.