Joined in 2023 
82 
63 About this deal
com: TUSITA Flush Out Front Mount and Insert Compatible with Garmin Edge GPS Bike Computer, XOSS G/G+, Varia UT800 - Cycling Handlebar 25. Fits K-EDGE MAX Mounts and Out-Front Mounts (9100(W), 9000(W), 4505(W), 4500(W), 2910, 1905, 1900, 2610, 1605, 1600, 2510 1505, 1500, 560, 505, 500) NOT COMPATIBLE WITH 1100, 1611, 1600AR2, 1600AR, 1911, 1500R, 2900, 2600, and 2500,(SPORT, RACE, SPLAYD) . PayPal Credit and PayPal Pay in 3 are trading names of PayPal UK Ltd, Whittaker House, Whittaker Avenue, Richmond-Upon-Thames, Surrey, United Kingdom, TW9 1EH.
A GoPro lug has been added underneath for maximum flexibility, allowing you to mount additional devices such as cameras and lights underneath your computer without cluttering the rest of your handlebars. Check the mounting bolt is long enough to fully engage with the tee nut but not too long to protrude past the tee nut and foul your handlebars.
Therefore if you mount a Garmin Edge cycle computer to this mount it may not be the correct orientation for your setup. The choice between the three largely depends on your setup preferences and the angles you want to capture. If you are looking to capture quick moments without needing the GoPro to be always available, this is a great option for you.
Due to the extended aerobar, the aerodynamic K-Edge mount is also able to accommodate even the large GARMIN Edge models up to the Edge 1030 plus. With KOM Cycling's CM06 Quick Release Mount, CM03 GoPro Mount, or Top Mount, attaching your GoPro camera to a Garmin mount has never been easier. It pairs perfectly with the MagCAD GoPro Saddle Mount to hold your Garmin Varia securely behind your saddle. The adapter attaches directly to the under-side of the camera, replacing the factory mounting bracket. A Garmin Edge computer mount that attaches to the faceplate of compatible direct mount stems such as Fizik, Cervelo and 3T.
The GoPro lug on this mount is slightly offset so you can mount it up or down and get the perfect position. But this right is limited to 30 days from the date you took ownership of the goods (this could be the date of purchase or the date the goods were delivered to you - whichever is later). Please note the Garmin interface on the Varia devices is the same as the Garmin Edge devices but rotated 90 degrees. Can be used with Magicshine TTA out front mount, MJ-6272 out front mount, or any compatible Garmin handlebar mount.
In addition, you can attach your GoPro action cam or a device that is compatible with the GoPro mounting system to the bottom of the mount. If you own a rather small GARMIN Edge model and want to place it as close to the handlebar as possible, the K-Edge GARMIN MAX Mount Combo Handlebar Mount (prod. The mount is designed with a RAM 1" diameter patented rubber ball and socket system that has adjustment points at both ends of the double socket arm; this allows for almost infinite adjustment and perfect viewing angles. Thread length for the adaptor bolts is 10mm and may need to be filed down depending on the thickness of your computer mount.Our Out Front GoPro Adaptor computer mount adaptor is a lightweight but heavy duty adaptor manufactured to fit a variety of computer mounts including Garmin/ Wahoo/K-Edge ( and many more). Stay ahead of the pack with the only out-front mount designed exclusively for the LEVEL 5 and Ultra carbon integrated handlebar systems. The Topeak Up-To-Front Multi-Mount with its low-profile, compact design fits most stem faceplates and aligns everything to be mounted front and center for viewing convenience. The suction cup, twist lock base is designed to have a strong hold on glass and non-porous plastic surfaces. Please be aware, this MagCAD mount is compatible with Garmin Varia radar lights up to the RTL515/516.
Great Deal 
New Comment